Issue
- Oven clock flashes
- Oven clock displays "0:00" or "12:00" and flashes
- How to set the oven clock?
- How to change the displayed time in the oven?
Applies to
- integrated oven
- freestanding cooker
Resolution
Set the time by following the instructions in the user manual (chapter Clock Functions). Download the user manual.
The ways of setting the time vary depending on the type of control panel
Examples of oven/cooker control panels and how to set the time:
Command wheel
1. Turn the oven on
2. Use the wheel to select the menu in the top right corner and press the wheel to confirm the choice
3. Turn the wheel to basic settings and press the wheel to confirm the choice
4. Turn the wheel to the time of day and press the wheel to confirm the choice
5. Turn the wheel to select the time you want and press to confirm your choice
6. Turn the oven off and the time you have set will show
Time skip into the video at 0:13
Touch Control
1. Turn the oven on
2. Use 
to scroll down the menu to basic settings and press OK
3. Use 
to scroll down to the time of day and press OK
4. Use 
and 
to adjust the hour and press OK
5. Use 
and 
to adjust the minute and press OK
6. Your time will be set
Skip into the video at 0:50
Rotary Dials
1. Press the clock function button 
until the clock symbol appears 
2. Use the 
and 
to set the time and use the clock function button to switch between hour and minutes
3. Leave for a few seconds and the timer will set itself
Skip into the video at 0:32
Free-standing cookers
1. Press the clock function button 
until the clock symbol appears 
2. Use the 
and 
to set the time and use the clock function button to switch between hours and minutes
3. Leave for a few seconds and the time will set itself
If you found the following information helpful, please give us a thumbs up below. If this information did not resolve your question, all constructive feedback is welcome.
Cause
- Flashing "0:00" on the clock’s display may be caused by a power failure in the socket to which the oven is connected to.
- New installation - time needs to be set before first use
