Gas Hob Maintenance  

A gas hob is a key kitchen appliance that many of us use regularly. Over time, dirt and grime can accumulate, making your hob look unsightly and hindering your cooking experience.

In this guide, we explore how to clean your gas hob to keep it looking its best. Whether you want to know how to clean hob rings or maintain the pan supports, follow our simple steps below to boost your appliance’s look and functionality.   

Before you start cleaning  

Before you begin cleaning that it is completely cool and all the knobs are switched off to avoid injury and damage to the appliance. You should also remove all pan supports for easy access when wiping the surface.

 

Clean the gas hob surface

To clean your stainless steel gas hob surface, you’ll need:

  • Soft, clean cloths
  • Non-metallic brush
  • White vinegar
  • Hot water
  • Washing-up liquid

The key to maintaining your gas hob’s surface is to use hot, soapy water and clean it by hand. 

  1. Dip a soft sponge in hot, soapy water and gently wipe it over the hob’s surface.
  2. If your hob has controller knobs, remove these and soak them in a bowl of white vinegar. If they can’t be removed, spray them with a solution of water and white vinegar instead.

Regular maintenance can help keep your gas hob looking and functioning at its best. You should clean any food and liquid spills immediately to prevent them from hardening and becoming difficult to remove. This will save you time in the long run and make it easier to deep clean your hob.

  • Clean the gas hob burner caps and pan supports

    You should never place cast-iron pan supports in the dishwasher. Instead, clean them using a non-abrasive cloth dipped in warm water and washing-up liquid.

    1. Wait until the pan supports are completely cool.
    2. Gently place them in the water and run the cloth over them to remove debris.
    3. Use a non-metallic brush to tackle tough stains.

    Wondering how to clean gas hob burners and burner caps? You can also wash these using the method listed above.

  • Dry the gas hob burner caps and pan supports

    It’s important to thoroughly dry the burner caps and pan supports before replacing them.

    1. Use a clean, soft cloth to gently dry the hob burner caps and pan supports.
    2. Once they are completely dry, place them carefully back on the hob, ensuring they are securely fitted in the correct place.
    3. Switch each burner on for several seconds. This will dry out moisture on the cap and prevent rust from forming.

Watch our YouTube tutorial  

For more details on how to clean and dry your gas hob, watch our handy YouTube tutorial. You can also visit our FAQs page for answers to commonly asked questions about how to maintain your appliance.