Issue
- Gas hob displays message H and those burners cannot be ignited
- When switched the hob OFF and ON the message F appears
Applies to
- Electronic Gas hobs
Resolution
1. Deactivate and activate the hob.
- After light animation, when "F" reappears, touch "||" and then
within 3 seconds. - When you see "0" the fault is reset
2. Make sure that the crown and the flame cap are correctly positioned, and clean the metal part of the flame safety device.
3. Contact an Authorized Service Center.
If the above advice does not resolve the problem, we recommend requesting a visit by a service engineer.
