Issue
- Microwave combi-oven displays error code
- Fault codes in microwave combi-ovens
Applies to
- Microwave combi-oven
Resolution
When the software error occurs, the oven display shows an error message.
In this section, you will find a list of the problems that you can handle on your own.
| Code and description | Remedy |
F240, F439 - the touch fields on the display do not work properly. | Clean the surface of the display. Make sure there is no dirt on the touch fields. |
| F601 - there is a problem with the Wi-Fi signal. | Check your network connection. Refer to the "Before first use" chapter, Wireless connection. |
| F604 - the first connection to Wi-Fi failed. | Turn the oven off and on and try again. Refer to the "Before first use" chapter, Wireless connection. |
F908 - the oven system cannot connect with the control panel. | Turn the oven off and on. |
F131 - the temperature of the magnetron sensor is too high. | Turn the oven off and wait until it cools down. Turn the oven on again. |
| F602, F603 - Wi-Fi is not available | Turn the oven off and on. |
If the above steps don't resolve the issue then a service visit by one of our approved service providers is recommended.
