Before any maintenance operation, deactivate the appliance and disconnect the mains plug from the socket.
Always take care when moving appliances, for heavy appliances it's necessary two persons to move it.
Always use safety gloves and enclosed footwear.
Please note that self-repair or nonprofessional repair can have safety consequences if not done properly
How to disassemble and assemble the dishwasher inner door.
If present, remove the worktop by unscrewing the 2 rear screws (right & left)
If present, unhook and remove the plinth by pushing in the lower part (right & left)
remove the outer door unscrewing the 6 screws (3 left & 3 right)
If present, remove the sides (left & right) by removing the 2 screws, pushing the 2 flaps and unsnapping by the last flap
Remove the 6 fixing screws and unplug all of the connections and harness from sockets to before removing the detergent dispenser.
Remove the 6 screws (3 left & 3 right) and unplug all of the connections and harness from sockets before removing remove the top part of the door where is the control panel.
Remove the 2 fixing screws of the door lock to remove it.
open the door and block the movement of the hinge by placing a pin in the highlighted hole
Remove the 2 fixing screws on the inner door (right & left) and remove the outer door
Unhook the ground wire. Unhook the hinge rod. Remove the door
Replace the inner door.
Assemble all components in reverse order of the disassembly steps.
