Congratulations on your purchase of an AEG 8000 Cordless Cleaner. This cordless cleaner not only provides powerful responsive suction to get floors and other areas thoroughly cleaned, but it also has a robust battery that delivers up to 60 minutes of runtime.* Its powerful suction and ease of use will provide an outstanding cleaning experience.
The AEG 8000 Cordless Cleaner also comes with a unique Roll-in-Roll-Out charging station for both securely storing and charging the vacuum cleaner. The Roll-in-Roll-Out charging station also allows you to start cleaning without having to first lift the vacuum cleaner.
We know you’re excited to unpack and use your new versatile cleaning machine. So, let’s start with some simple steps on how to easily assemble and charge your new AEG 8000 Cordless Cleaner.
*Based on internal tests (2021) on the handheld units on min mode according to IEC 62885-4
STEP #1 - VERIFY THE BOX CONTENTS
Take all the contents out of the box and verify you have the following:
1. Base plate
2. UltimatePower multi-surface nozzle
3. UltimatePower hard floor nozzle
4. BedProPower™ Plus nozzle
5. PetPro nozzle
6. Battery pack
7. Handheld unit
8. Telescopic tube
9. Delicate dusting brush
10. Short crevice
11. Angle joint
12. Single accessory holder
13. Triple accessory holder
14. Charging stand tube
15. Small dusting brush
*Colours shown on the packaging and in advertisements may not be the same as the item you purchased, actual colours vary per model.
** The nozzles and accessories shown on the packaging and in advertisements may vary based on country-specific models.
STEP #2
Put the power adapter cable into the bottom of the base plate.
STEP #3
Mount the charging stand tube to the charging base plate.
STEP #4
Attach the battery pack to the handheld unit, and the handheld unit to the telescopic tube.
STEP #5
Attach the UltimatePower multi-surface nozzle to the end of the telescopic tube.
STEP #6
Roll in the fully assembled 8000 cordless cleaner into the charging stand and charge for 2.5hrs before use.
